Oil filterOil filter
In the compressor system, the oil itself must be filtered on a regular cycle so as to remove contaminants that may enter the compressor and damage the unit. This is accomplished through the installation of a lube oil filter, either in cartridge, or spin- on form, which then ensures that all of the oil is cleaned as it moves through the filter. Filtering in 5–25 micron range (depending upon application), it is again, the depositing of oil-borne contaminants over time (similar to the oil-separator), that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil.
Product Type
Filtering in 5–25 micron range (depending upon application), it is again, the depositing of oil-borne contaminants over time (similar to the oil-separator), that causes the oil filter to continually increase in differential pressure to a point at which it must be replaced in order to continue proper filtration of the compressor oil.
Performance Features
Like all of our products, KELTEC Technolab oil filters are
built of the highest quality materials and workmanship.
Specific filtration levels are obtained through the exclusive
use of high grade filter media and consistent surface area
control, obtained by a strict maintenance of pleat quantity
and depth. Leakages are prevented by the positive seals
obtained with both plastisol and epoxy encapsulation.
Viton seals are used applications of synthetic oil are
typical.
Specification
Oil Filters
| A | B | C | ||
| Part No. | Capacity (gallons/liters/min.) |
Thread | OD inches / mm |
Length inches / mm |
| KL310-017 | 2.17 / 12.00 | 3/4–16 | 3.15 / 80.00 | 3.66 / 93.00 |
| KL470-008 | 5.00 / 20.00 | 3/4–16 | 3.15 / 80.00 | 5.50 / 140.00 |
| KL510-016 | 10.50 / 40.00 | 1–12 | 3.78 / 96.00 | 6.77 / 172.00 |
| KL320-004 | 10.50 / 40.00 | 3/4–16 | 3.78 / 96.00 | 5.50 / 140.00 |
| KL460-009 | 10.50 / 40.00 | 1–12 | 3.78 / 96.00 | 5.50 / 140.00 |
| KL135-035 | 11.89 / 45.00 | 1–12 | 3.78 / 96.00 | 6.77 / 172.00 |
| KL440-015 | 18.50 / 70.00 | 1–12 | 3.78 / 96.00 | 8.30 / 210.00 |
| KL590-007 | 18.50 / 70.00 | 1–12 | 4.33 / 110.00 | 8.94 / 227.00 |
| KL800-020 | 47.50 / 180.00 | 1-1/2–16 | 5.50 / 140.00 | 11.89 / 302.00 |
